Oil well testing in Duchesne County is a critical part of well site operations and needs to be undertaken proactively, to gauge crucial data regarding the operation of that well. Without proper well testing, time and resources can be wasted on pumping a well that’s not yielding sustainable returns—or worse, problems can develop downhole that aren’t able to be quantified until they’ve fully erupted.
But what exactly is involved when it comes to well testing and what data can be gleaned from the process? A number of things, depending on the type of test being administered. There are actually two specific varieties of test:
- Productivity tests: This test is going to give well operators a sense of the production capabilities and rates of a well. Some of the data being measured in this test includes flow rates, well pressure, fluid composition, fluid properties and well temperature, among other things. This data can be applied to gauge the overall effectiveness of the well and to predetermine issues that may be occurring downhole.
- Descriptive tests: These tests are meant to give well operators a sense of the physicality of a well, such as the depth and width of a bore or any formations that may be present within the reservoir. This type of test can also gauge the hydraulic communication between wells, painting an underground picture for operators.
Both types of testing are critical when it comes to gauging the viability and efficiency of a well site, as well as the safety of its operation. The frequency and instances in which these tests are run, however, is very different.
Productivity tests can be run at many different intervals, depending on what’s being measured. Daily tests—so aptly named for their daily recurrence—are perhaps the most common productivity tests run on a well, however pressure and flow rate tests can be run throughout the operation of a well.
Descriptive tests, on the other hand, are generally run sparingly. These tests are often a core component when it comes to getting a well up and running, but aren’t needed after continuous operation—unless the parameters of a well change or are subjected to potential issues, usually indicated by productivity testing.
Oil well testing in Duchesne County is a fundamental part of regular and sustained operations at a well and, when used appropriately, can give tremendous insight into more than just the well itself—they can also yield viable data about the geographic area. Things like good well pressure, amiable fluid composition and more can be markers for a prolific pumping area and, with good data, well results can be replicated in similar areas to yield increased productivity.
Are you taking advantage of productivity and descriptive well testing? If not, consult with the professionals at Willies Hot Oil Service Inc. for more information about proper testing. Our experts can assist you with all forms of well testing and have the capabilities and tenure required to make sure you’re getting nothing short of profound data.